In response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.
When you are building in one of the premier locations in Norwest Sydney, it’s all about the detail, the look, the feel and the performance of your building to match the lifestyle your new residents demand from your new community.
Presented with tight timelines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.
To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.
Vulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951
Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.
The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.
The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job.
Vulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951 NF
Vulkem H2 Plus is a single component, rapid cure, acrylic waterproofing membrane, incorporating micro fibres to increase strength and wet film thickness.
- Tested successfully to AS 4654.1 ensures it meets the requirements set forth by the National Construction Code of Australia.
- Low odour allows for use in low air flow areas like bathrooms, wash-rooms, and kitchen areas.
- Due to acrylic chemistry, Vulkem H2 Plus is compatible with most tile adhesives.
- Water clean-up minimises the need for solvents on-site or solvent exposure to contractors.
- Greenstar Compliant
Vulkem NEM is one of our most popular products. Vulkem NEM is a single pack elastomeric, moisture curing, high tensile strength and tough curing polyurethane membrane. It cures to form a flexible rubber membrane. Vulkem NEM may be used to apply a seamless, monolithic waterproof membrane to concrete substrates, compressed sheeting and plywood which is well anchored and primed. It is simple and easy to apply by either notched trowel, roller or brush to vertical and horizontal applications.
TREMflex 50 is specially formulated to ensure bubble-free cure even at very high temperatures and humidity climatic conditions.
It cures by reaction with atmospheric humidity to produce a joint sealant with a 50% joint movement accommodation factor. The sealant guns and tools consistently well at even the most extreme temperatures.
Vulkem 951NF is a Low VOC, Green Star Qualified UV resistant topcoat, completing the Waterproofing system suitable for a pedestrian deck
Vulkem 951NF Top Coat is an aliphatic, two-component polyurethane, which when used in conjunction with the recommended aggregate, creates a tough, aesthetically appealing, skid-resistant, wearing surface that forms a strong interlaminate bond.