Vulkem NEM is a single component, moisture curing, high tensile strength and tough curing polyurethane membrane.
Vulkem H2 Plus is a single component, rapid cure, modified acrylic waterproofing membrane, incorporating micro fibres to increase strength and wet film thickness.
TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to “Green” (24 hour old) concrete.
TREMcrete NWP is a unique brushable penetrative fine cementitious coating specially designed for waterproofing and protection of old and new concrete against positive and negative water pressure.
TREMcrete HBM is a high build thixotropic synthetic fibre reinforced cement based rheoplastic and non-segregating mortar.
Paraseal LG is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).
Paraseal Saltwater is a sheet applied waterproofing membrane specially designed for waterproofing applications in areas where saline, alkaline, acid, etc. conditions exist.
EUCO QWIKjoint 200 is a fast-setting, semi-rigid polyurea used for filling control and construction joints in industrial concrete floors
TREMbond UHS is a premium grade non slip, non slump, flexible white tile adhesive designed to withstand movement in substrates.
Tremco Epoxy Primer is a 100% solids, epoxy primer recommended for use on porous substrates and is also used as a compatible tie-coat to create connectivity between otherwise incompatible membranes.
Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite.
Xylene solvent used in conjunction with Tremco polyurethane sealants and membranes.
TREMcoat EPA is a two-component, versatile epoxy paste structural adhesive and void filler.
TREMcoat MPE is a high strength epoxy system that is specially formulated to serve a multitude of applications on a construction project.
TREMcrete Activator is a chemically blended aqueous solution, formulated as a Penetrative Corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.
TREMcrete HB Ultra is a high build thixotropic synthetic fibre reinforced cement based rheoplastic and non-segregating mortar.
TREMcrete MPR is a unique penetrative cementitious coating specially designed for the waterproofing, protection and repair of old and new concrete
TREMcrete Plug is a one component, rapid hardening plug composition for permanent stopping of water seepage and pressure leaks through cracks and construction.
TREMcrete Zinc Rich Primer is a fast drying, high solids, high performance, coating designed to protect steel against corrosion when exposed to severe corrosive environments, such as salt and water
TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.
TREMproof 201/60 is a high-solids, solvent curing modified polyurethane waterproofing membrane that can be applied primer-less to most concrete applications.
TREMproof 260 is a polymer-enhanced, single component, fluid-applied, bitumen emulsion, waterproofing membrane.
TREMproof 3300 HD is a self-adhesive, SBS based bituminous waterproofing membrane that is self-protected with a high-density polypropylene (HDPE) facer.
TREMproof 90 WB primer is a single-component, waterborne, acrylic primer designed to act as an adhesion promoting primer.
TREMproof Contact Adhesive has been developed to provide an adhesive bond for self-adhesive waterproof membranes (TREMproof 3300HD) as well as TREMproof Torch Fleece membranes.
TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.
TREMproof P85 is a 100% solids, spray applied hybrid polyurea waterproofing membrane that allows for rapid installation, and assists with accelerated construction schedules.
TREMproof RT Plus is a two component, acrylic modified cementitious coating, primarily used for internal tanking and waterproofing of concrete.
TREMproof Torch 3000 is a 3mm thick, APP modified bituminous torch applied waterproofing membrane base sheet.
TREMproof Torch 4000M is a 4mm thick, APP modified bituminous torch applied waterproofing membrane which is polyester spunbond, with glass filament reinforcement.
An SBS-modified bitumen, torch applied, elastomeric joint waterproofing material, for use in conjunction with Tremco’s TREMproof Torch 3000, 4000, 4000M, or Anti-root offering.
TREMproof Torch Bitumen Primer is a solvent based modified bitumen primer designed to assist with adhesion of the TREMproof Torch membranes to the substrate
TREMproof Torch Fleece is a 1.9mm thick, APP modified bitumen fibre back ventilated base sheet.
One-Part, Rapid Drying Solvent-Based Primer for Porous Substrates Prior to Application of Polyurethane Sealants/Membranes
A quick-drying, one-part, moisture-curing primer for use to promote interlaminary adhesion between Tremco waterproofing layers after the membrane has been exposed for a prolonged amount of time.